It is impossible to pass Cisco 300 075 ciptv2 exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Cisco 300 075 dump practice questions. You will get a surprising result by our Up to the minute Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.

Q17. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers? 

A. H.225 trunk (gatekeeper-controlled) 

B. intercluster trunk (non-gatekeeper controlled) 

C. SIP trunk 

D. intercluster trunk (gatekeeper-controlled) 

Answer:


Q18. The network administrator at Enterprise X is creating the guidelines for a new IPT deployment consisting of a large number of remote offices. Every user within Enterprise X is assigned a directory number of 5 digits. Which option might cause an issue in a multisite deployment? 

A. Overlapping DID ranges are allocated to each site. 

B. The maximum number of IP phones are in use at each remote site. 

C. MoH cannot be provided for the remote sites. 

D. All media streams are necessarily routed through the central office for calls to establish correctly. 

Answer:


Q19. In a Centralized Call processing architecture, you have deployed Extension Mobility (EM) feature. After the deployment of EM, when one of the end-users tries to login to the IP phone, the Error 25 is displayed on the screen. What three things should you do to resolve this issue? (Choose three.) 

A. upgrade the firmware of the IP Phone to the latest version 

B. activate EM feature service under Cisco Unified Serviceability 

C. associate EM Device profile with the end-user 

D. subscribe the MAC address of the IP Phone to EM Service 

E. update EM Phone Service URL to point to the publisher 

F. subscribe device profile to EM phone service in case the enterprise subscription of EM Service is disabled 

Answer: B,C,D 


Q20. Refer to the exhibit. 

Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location? 

A. Total of four calls; two incoming and two outgoing. 

B. Total of two calls in either direction. 

C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration. 

D. Total of four calls in either direction. 

E. Two outgoing calls. Incoming calls are unlimited. 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wpxref28640 


Q21. Which two statements about the functionality of a gatekeeper are true? (Choose two.) 

A. Cisco Unified Communications Manager has gatekeeper functionality built in. 

B. Cisco Unified Communications Manager registers with a gatekeeper via SIP. 

C. Cisco Unified Communications Manager registers with a gatekeeper via H.323. 

D. A gatekeeper can enable CAC and AAR. 

E. A gatekeeper can enable CAC, but not AAR. 

Answer: C,E 


Q22. Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN? 

A. Configure Cisco IP Phones for AAR. 

B. Configure AAR to work with SRST. 

C. Configure AAR to work with CTI route points. 

D. This configuration is not possible using AAR. 

Answer:


Q23. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished? 

A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI. 

B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns. 

C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns. 

D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls. 

Answer:

Explanation: 

Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml 


Q24. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D