It is impossible to pass Cisco 300 075 vce exam without any help in the short term. Come to Exambible soon and find the most advanced, correct and guaranteed Cisco cisco 300 075 practice questions. You will get a surprising result by our Far out Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.

Q25. Refer to the following exhibit. 

Which Cisco IOS SAF Forwarder configuration is correct? 

A. Exhibit A 

B. Exhibit B 

C. Exhibit C 

D. Exhibit D 

Answer:

Explanation: 

Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below 

1. enable 

2. configure terminal 

3. router eigrp virtual-instance-name 

4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number 

5. topology base 

6. external-client client_label 

7. exit-sf-topology 

8. exit-service-family

9. exit

10. service-family external-client listen {ipv4 | ipv6} tcp_port_number

11. external-client client-label

12. username user-name

13. password password-name 

14. 


Q26. Which statement about H.323 Gatekeeper Call Admission Control is true? 

A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications deployments that use locations based Call Admission Control. 

B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications deployments. 

C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications Express deployments. 

D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications Manager. 

Answer:

Explanation: 

Incorrect Answer: A, C, D in distributed call processing deployments on a simple hub-and-spoke topology, you can implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express (Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each time the agent wants to place an IP WAN call. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cac.html#wp1044743 


Q27. Which bandwidth amounts are correct for configuring locations? 

A. 8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722 

B. 8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722 

C. 64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722 

D. 8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722 

Answer:


Q28. What impact do roaming-sensitive settings and Device Mobility settings have on call routing? 

A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the AAR group, AAR CSS, and device CSS. 

B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the AAR group and AAR CSS. 

C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings modify the device CSS. 

D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility settings, on the other hand, may have an impact on call routing because they modify the device CSS, AAR group, and AAR CSS. 

Answer:


Q29. In a Cisco Unified Communications Manager centralized call processing model, what is the best CAC method recommended for this type of deployment? 

A. QoS-based 

B. location-based 

C. RSVP-based 

D. region-based 

E. gateway-based 

F. gatekeeper-based 

Answer:


Q30. Which system configuration is used to set a restriction on audio bandwidth? 

A. region 

B. location 

C. physical location 

D. licensing 

Answer:


Q31. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link: 

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml 


Q32. When configuring a video ISDN gateway, which two actions are requirements for the Cisco Preferred Architecture for Enterprise Collaboration? (Choose two.) 

A. Use SIP instead of H.323. 

B. Perform dial string manipulation on Cisco Unified Communications Manager. 

C. Use an * (asterisk) at the end of each ISDN number, as a suffix. 

D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix. 

E. Use H.323 instead of SIP. 

Answer: A,B