Testking 300 075 pdf Questions are updated and all 300 075 vce answers are verified by experts. Once you have completely prepared with our 300 075 vce exam prep kits you will be ready for the real 300 075 vce exam without a problem. We have Most recent Cisco cisco 300 075 dumps study guide. PASSED 300 075 ciptv2 First attempt! Here What I Did.

Q49. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

A new DX650 IP phone with MAC address D0C7.8914.132D, IP address is 172.18.32.119 has been added to the Cisco Unified Communications Manager, but is not registering properly. 

What is causing this failure? 

A. Device Pool cannot be default. 

B. The DX650 is the incorrect calling search space. 

C. The DX650 Phones does not support SIP. 

D. The location Hub_None has not been activated. 

E. The DX650’s MAC address is incorrect in the Cisco UCM. 

Answer:

Explanation: 

From the screen capture below we can see that the DX650 phone’s MAC address was incorrectly entered as D0C78914131D, not D0C78914132D. 


Q50. Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST? (Choose three) 

A. Define the SRST reference for phones in the Device Pool configuration 

B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways. 

C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for remote-site phones in SRST mode. 

D. Enable SIP trunking between both remote and hub sites to provide mesh coverage. 

E. Define the SRST reference in the configuration on the IP Phones. 

F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it is enabled automatically. 

Answer: A,B,C 


Q51. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be? 

A. H.323 gateway 

B. Cisco 3825 

C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected. 

D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router. 

E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router. 

Answer:


Q52. You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP gateways to function correctly? 

A. Allow access to TCP port 2428. 

B. Block TCP port 1720. 

C. Open access to all TCP and UDP ports. 

D. Allow access to TCP port 1720. 

E. Block access to TCP ports 2427 and 2428. 

Answer:


Q53. When using Cisco Unified Communications Manager Express in SRST mode, how many multicast music on hold streams can be utilized by the system at any given time? 

A. 3 

B. 6 

C. 2 

D. 4 

E. 1 

F. 5 

Answer:


Q54. When considering Extension Mobility, what happens if a user logs into a phone for which the user does not have a user device profile? 

A. The phone reboots with an error. 

B. If a default device profile for this phone has been configured, it is loaded. 

C. The user cannot log in. 

D. Another user device profile is loaded. 

Answer:


Q55. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer:


Q56. When implementing a dial plan for multisite deployments, what must be present for SRST to work successfully? 

A. dial peers that address all sites in the multisite cluster 

B. translation patterns that apply to the local PSTN for each gateway 

C. incoming and outgoing COR lists 

D. configuration of the gateway as an MGCP gateway 

Answer: