we provide Highest Quality Cisco 300 075 vce book which are the best for clearing cisco 300 075 test, and to get certified by Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2). The cisco 300 075 Questions & Answers covers all the knowledge points of the real 300 075 ciptv2 exam. Crack your Cisco 300 075 vce Exam with latest dumps, guaranteed!

Q105. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41? 

A. Set QoS mode to DiffServ and tag value 32. 

B. Set QoS mode to IntServ and tag value to 34. 

C. Set QoS mode to DiffServ and tag value 34. 

D. Set QoS mode to IntServ and tag value to 32. 

E. Set QoS mode to ToS and tag value to 32. 

Answer:


Q106. Which action configures the registration of transcoder resources? 

A. Cisco IOS software registers transcoder resources with SIP. 

B. Cisco IOS software registers transcoder resources with SCCP. 

C. Cisco IOS software registers transcoder resources with H.323. 

D. Cisco IOS software does not register transcoder resources. 

Answer:


Q107. What is the standard Layer 3 DSCP media packet value that should be set for Cisco TelePresence endpoints? 

A. CS3 (24) 

B. EF (46) 

C. AF41 (34) 

D. CS4 (32) 

Answer:


Q108. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html 


Q109. What is the fastest way for an engineer to test the implementation of SRST in a production environment? 

A. Shut down the Cisco Unified Communications Manager Servers. 

B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers. 

C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router. Remove the null route when the operation is verified. 

D. Unplug the IP phones from their switch ports. 

E. Verification is not needed. 

Answer:


Q110. What is a prerequisite of AAR deployment? 

A. You must have a single distributed call processing deployment. 

B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. 

C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. 

D. Clustering must be implemented over the WAN. 

E. You must have a centralized call processing deployment. 

Answer:


Q111. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern \\+!, how should the translation pattern be configured? 

A. 9001.4085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: + 

B. 9.0014085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1 

C. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1 

D. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: + 

E. 001.4085551234 with the Called Party Transformation:Prefix Digits Outgoing Calls: + 

Answer:

Explanation: 

Incorrect Answer: A, B, C The PSTN access code for the UK is 9, International call code is 001, The international escape character, +, signifies the international access code in a complete E.164 number format Link: http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03r p.html 


Q112. The following exhibit shows configs for H.323 gateway. You have been asked to implement TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using Cisco Unified Communications Manager. The remote office has an MGCP gateway and the HQ office has an H.323 gateway. Once the call arrives at the HQ, it should break out to the PSTN as a seven-digit local call. Which statement about the route pattern is true? 

A. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

B. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot 

C. route pattern should be 91201.[2-9]XXXXXX 

D. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot 

E. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Destination pattern is 91, HQ office area code is 201 .