Our pass rate is high to 98.9% and the similarity percentage between our 300 075 pdf study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 vce exam in just one try? I am currently studying for the Cisco 300 075 ciptv2 exam. Latest Cisco 300 075 vce Test exam practice questions and answers, Try Cisco cisco 300 075 Brain Dumps First.

Q25. Refer to the exhibit. 

You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly? 

A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command. 

B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command. 

C. The sccp ccm group number needs to match the associate ccm 2 command. 

D. The maximum sessions command must match the number of codecs configured under the dsp farm profile. 

E. The sccp ccm group number must match the voice-card number. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmevtr ns.html 


Q26. Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC? 

A. Configure AAR in Cisco Unified Communications Manager. 

B. Configure CFUR in Cisco Unified Communications Manager. 

C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified Communications Manager. 

D. Configure a route pattern to a gateway in Cisco Unified Communications Manager. 

Answer:


Q27. Assume that local route groups are configured. When an IP phone moves from one device mobility group to another, which two configuration components are not changed? (Choose two.) 

A. IP subnet 

B. user settings 

C. SRST reference 

D. region 

E. phone button settings 

Answer: B,E 

Explanation: 

Incorrect Answer: A, C, D Although the phone may have moved from one subnet to another, the physical location and associated services have not changed. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsdevmob.html#wp1137460 


Q28. A voice-mail product that supports only the G.711 codec is installed in headquarters. 

Which action allows branch Cisco IP phones to function with voice mail while using only the G.729 codec over the WAN link to headquarters? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure transcoding within Cisco Unified Communications Manager. 

C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones. 

D. Configure transcoder resources in the branch Cisco IP phones. 

Answer:


Q29. Refer to the exhibit. 

Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? 

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number. 

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number. 

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

Answer:


Q30. Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? 

A. location controller 

B. route pattern 

C. route string 

D. URI 

Answer:


Q31. Which two configurations can you perform to allow Cisco Unified Communications Manager SIP trunks to send an offer in the INVITE? (Choose two.) 

A. Enable the Media Termination Point Required option on the SIP trunk. 

B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile. 

C. Select the Display IE Delivery check box in the gateway configuration. 

D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager servers. 

E. Select the SRTP Allowed check box on the SIP trunk. 

F. Execute the isdn switch-type primary-ni command globally. 

Answer: A,B 


Q32. Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder? 

A. Call Control Discovery requesting service 

B. Hosted DNs service 

C. Service Advertisement Framework client control 

D. Cisco Unified Communications Manager database 

E. Service Advertisement Framework-enabled trunk 

F. gatekeeper 

Answer: