Act now and download your Avaya 7004 test today! Do not waste time for the worthless Avaya 7004 tutorials. Download Refresh Avaya Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam exam with real questions and answers and begin to learn Avaya 7004 with a classic professional.

New Avaya 7004 Exam Dumps Collection (Question 5 - Question 12)

Q1. In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

A. Configure Numbering Zones.

B. Select the Private Dial Plan from the customeru2019s Features page.

C. Select the Public Dial Plan from the customeru2019s Features page.

D. Select the u201cEnable Numbering Zonesu201d option from the customeru2019s Feature page.

Answer: D



Q2. Click the Exhibit button.

Consider the customeru2019s current programming:

NCOS of 2 = FRL of 2

Class of Service on all sets is CTD

With reference to the exhibit, how would you modify Route List Index 1 to permit all station users with an NCOS of 2 to place 1+912 calls?

A. Change FRL on Route List Index 1 to FRL 1

B. Change FRL on Route List Index 1 to FRL 4

C. Change FLI on NPA entry for 1214 to RLI 2

D. Leave all existing programming as is.

Answer: A



Q3. The Satellite Link Control feature ensures that the configuration of a call does not include more than one communications satellite trunk. Tandem trunk calls, when connected through more than one communication satellite trunk, are subject to transmission distortion due to propagation.

Which parameters are required to be equipped or configured for Satellite Link Control in the Communication Server 1000?

A. Network Signaling (NSIG) package must be equipped. Route must be configured with ESN3 signaling.

Route must be designated as a satellite route.

B. Route must be configured with STD or ETN signaling. Route must be designated as a satellite route.

C. Network Transfer (NXFR) package must be equipped. Route must be configured with ESN2 or ESN3 signaling Route must be designated as a satellite route.

D. Network Signaling (NSIG) package must be equipped. Route must be configured with ESN3 or ESN5 signaling.

Route must be programmed with a Traveling Class of Service (TCOS)

Answer: A



Q4. Click the Exhibit button.

An employee at a company is placing a call to telephone number 214-774-3299. The employee, believing this is a toll call, dials 9-1-214-774-3299. However, this call is a local call.

Access Code 1 = 9

The Central Office utilizes a 7-digital dialing plan.

Given the DMI indexes programmed into this Communication Server 1000 shown in the exhibit, which DMI would be used to modify the dialed digits to outpulse the correct digits to the Central Office?

A. DMI Table 1

B. DMI Table 2

C. DMI Table 3

D. DMI Table 4

Answer: B



Q5. Which Overlay (LD) is used to find an unused card slot (LUC) for a new Digital Line Card that will support five digital telephones?

A. LD 22

B. LD 20

C. LD 21

D. LD 81

Answer: B



Q6. To enabled and configured SIP on a Communication Server 1000 system, which software component on the IP Telephone Node must you enabled first using Element Manger?

A. SIPGateway

B. Media Gateway

C. Terminal Proxy Server (TPS)

D. SIP Proxy

Answer: C



Q7. A customer has just deployed a new Communication Server 1000 RIs. 7 x High Availability system. You have been instructed to configure the required virtual routes to comply with the company's dialing plan strategy.

Which Feature Package must be enabled to allow virtual routes on the system?

A. Package 147 ISDN Signaling Link

B. Package 148 Advanced ISDN Network Services

C. Package 145 integrated Services Digital Network

D. Package 161 ISDN Supplementary Features

Answer: B



Q8. Click the Exhibit button.

A customer has a Communication Server 1000 RIs. 7 x system with System Manger / Unified Management (UCM) enabled. They have requested the addition of two new UCM Administrator User with the limited ability to provision telephones at each site. Refer to the exhibit for the roles current existing in the system.

Which action can the Network Administrator take to add these new accounts per the customeru2019s requirements?

A. Change the built-in MemberRegister role to add the permissions required to allow telephone configuration.

B. Assign the new users to the built-in NetworkAdministrator role because it has the permissions that allow telephone configuration.

C. Change the built-in role Patcher role to remove all permissions except those that allow telephone configuration.

D. Add a new TelephonyAdmin role with the specific permissions required to allow telephone configuration.

Answer: D



P.S. Easily pass 7004 Exam with Allfreedumps Exact Dumps & pdf vce, Try Free: https://www.allfreedumps.com/7004-dumps.html ( New Questions)